When cold oil makes your tractor, truck, or generator harder to start, this 200-watt magnetic heater warms a steel oil pan without permanent installation. Unplug, remove, and reuse it on other equipment.
Cold oil makes an engine work harder during startup. If your tractor, generator, or truck spends winter nights outside or in an unheated building, this 200-watt Heat Magnet gives you a way to warm the oil through a steel pan before turning the key. It also works on magnetic metal housings for transmissions and hydraulic equipment. There's no adhesive to apply or heater to install inside the engine.
The magnetic base needs full contact with a clean, flat surface made of steel or another strongly magnetic metal, such as cast iron. Its compact footprint is approximately 4-3/8" x 2-1/2", but raised ribs, curved pans, and nearby parts can still prevent proper contact. It won't attach to aluminum or plastic. If your oil pan is aluminum, an adhesive silicone heater such as the ZE75MR Zerostart Silicone Pad Heater may be an alternative when its size and fluid capacity are a match.
Unlike adhesive oil-pan pads, this heater is removable, so you can prewarm one piece of equipment and use it on another when needed. The quick-grip handle gives you a way to position and lift the heater without grabbing its hot base. Unplug it, allow it to cool enough for safe handling, and remove it before starting the engine or moving the equipment. Alternative uses for localized heating include steel gutters and stock tanks.
The built-in thermostat limits the heater to a maximum of 250F (121C), helping control the temperature of the unit during preheating. That's the heater's maximum temperature, not a promised oil or fluid temperature. It uses a grounded 120V household connection. Its short power lead means you'll need a suitable grounded extension cord to reach most outlets.
Zerostart is a Phillips & Temro brand, from the company behind engine, battery, and equipment heaters. If the name is new to you, this portable heater comes from a manufacturer with years of experience developing products for cold-weather operation.
Attach the heater only to a clean, flat surface made of strongly magnetic metal, such as steel or cast iron. Aluminum, plastic, and nonmagnetic surfaces are not suitable. Make sure the entire magnetic base makes contact before connecting power.
This is a portable heater intended for use while the vehicle or equipment is parked and not running. Unplug the heater, allow it to cool enough for safe handling, and remove it before starting the engine, driving, or operating moving equipment.
The heater can reach 250F (121C). Use the quick-grip handle and avoid touching the heating surface during or immediately after operation. Keep the heater clear of flammable materials, sensitive wiring, hoses, and components that could be damaged by heat.
Connect to a properly grounded 120V outlet. The short power lead will generally require an extension cord. Use a grounded cord rated for the electrical load and suitable for outdoor conditions when applicable. Keep plugs and electrical connections dry and protect the cord from damage.
Review the Phillips & Temro Heat Magnet information before use. The built-in thermostat limits the heater temperature but does not guarantee a particular oil temperature or eliminate the need for proper placement and electrical safety.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Oil Pan Heater?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.









Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.